ASME SFA A5.14 ERNiCrMo 13 1.6mm Nickel Welding Wire
ERNiCr-3 nickel alloy bare wire is used for GMAW, GTAW, and SAW
Nickel Alloy welding.It is used for joining base materials such as
UNS number N06600. This includes ASTM grades B163, B166, B167, and
B168. This alloy can also be used for dissimilar welding using
various nickel alloys to stainless steels or carbon steels, as well
as for overlaying carbon steels. Also used for welding 9% nickel
steels to one another having high impact strength at low
temperatures. This versatile alloy has high strength and good
corrosion resistance, with oxidation resistance and creeprupture
strength at elevated temperatures.
Nickel Based Welding Wire
Nickel alloy welding wire ERNiCrMo-13 is a nickel-chromium-molybdenum alloy with extra low carbon and
silicon contents. It offers excellent corrosion resistance, high
mechanical strength, and better thermal stability. Because of its
low silicon and carbon contents and no tungsten, Pinnacle Alloys
ERNiCrMo-13 is not prone to grain-boundary precipitation during hot
forming and welding. Pinnacle Alloys ERNiCrMo-13 is well suited for
welding in a wide variety of chemical processing facilities in both
oxidizing and reducing media. This wire provides exceptional
weldability and very low sensitivity to hot cracking.
It is designed to match the nickel base alloy commonly known as alloy 59.
The high level of Mo is similar to alloys C276 but performance in a
wide range of more oxidising media is significantly enhanced in
alloy 59 by increasing Cr to 23%. This alloy also provides a tough
Nb-free weld metal for dissimilar welds in superaustenitic and
superduplex stainless steel or combinations of these with Ni base
alloys.
Nickel alloy Weling wire series:
ERNiCrMo-3,ERNiCrMo-4,ERNiCrMo-13,ERNiCrFe-3,ERNiCrFe-7,ERNiCr-3,ERNiCr-7,ERNiCu-7,ERNi-1,
ER70S-6.
Standard: Conforms to Certification AWS A5.14 ASME SFA A5.14
Size: 0.8MM / 1.0MM / 1.2MM / 1.6MM / 2.4MM / 3.2MM / 3.8MM / 4.0MM
/ 5.0MM
Form: MIG(15kgs/spool), TIG(5kgs/box),Strip
Nickel welding wire Nickel welding wire Nickel welding wire Nickel
welding wire Nickel welding wire
Chemical Properties
| CHEMICAL COMPOSITION % |
| C | P | S | Mn | Fe | Si | Ni+Co | Ti | Nb+Ta | Cr | Cu | Others |
| ≤0.1 | ≤0.03 | ≤0.015 | 2.5-3.5 | ≤3.0 | ≤0.5 | ≥67 | ≤0.75 | 3.15-4.15 | 18-22 | ≤0.50
|
| Ultimate tensile strength (psi) | 80,000 |
| Yield strength (0.2% offset) (psi) | 40,000 |
| Elongation in 2" (%) | 30 |
| Typical Welding Parameters |
| Diameter | Process | Volt | Amps (flat) | Amps (V/OH) |
| inch | (mm) |
| 0.035 | 0.9 | GMAW | 26-29 | 150-190 | Spray Transfer 100% Argon |
| 0.045 | 1.2 | GMAW | 28-32 | 180-220 | Spray Transfer 100% Argon |
| 1/16 | 1.6 | GMAW | 29-33 | 200-250 | Spray Transfer 100% Argon |
| 1/16 | 1.6 | GTAW | 14-18 | 90-130 | 100% Argon |
| 3/32 | 2.4 | GTAW | 15-20 | 120-175 | 100% Argon |
| 1/8 | 3.17 | GTAW | 15-20 | 150-220 | 100% Argon |
